Polyethylene

Pure UHMW Polyethylene   View All Products of this Supplier

We are Manufacturer and Exporters of Pure UHMW Polyethylene.

Lead Loaded Polyethylene   View All Products of this Supplier

We are Manufacturer and Exporters of Lead Loaded Polyethylene.

Polyethylene Terephthalate   View All Products of this Supplier

We are engaged in the superlative quality Poly Ethylene Terepthalate. The Poly Ethylene Terepthalate is a thermoplastic polymer resin of the polyester family made from petrochemical products. The Poly Ethylene Terepthalate can be obtained by the clients at affordable rates. Today, we are counted as one of the leading Poly Ethylene Terepthalate Traders and Dealers.

Chlorinated Polyethylene   View All Products of this Supplier

We offer Chlorinated polyethylene.

High-density Polyethylene   View All Products of this Supplier

We are Offering High-density Polyethylene, Hdpe Cable Material.
we are Offering High-density Polyethylene.
property Unit
typical Value
mass Density G/cm 3 0.941-0.959
melt Flow Rate(190 Centidegree /2.16kg) G/10min â�â¤1.0
tensile Yield Strength Mpa 19.0
flexural Modulus Mpa 965
elongation@ Break % 400
impact Embrittlement Temperature Centidegree Max -118
dielectric Constant 100khz 2.32
1mhz 2.31
loss Tangent 100khz Max 0.0001
1mhz Max 0.

Low Density Polyethylene   View All Products of this Supplier

We are Offering Low Density Polyethylene, Polyethylene.
melt Flow Rate(g/10min) 1.0

density(g/cm3) 0.918±0.002

fr ≤ 30

packing Density of Particles(kg/m3) ≥ 480

tensile Strength(mpa) ≥ 8.3

elongation At Break/% ≥ 500

hexane Extraction Rate ≤ 5.

Medium Density Polyethylene   View All Products of this Supplier

we offer Medium Density Polyethylene, mdpe rotational molding granule, mdpe virgin granule, mdpe raw material; medium density polyethylene etc.

Polyethylene Glycol 20000   View All Products of this Supplier

We offer polyethylene glycol.
Appearance: (25c): white solid powder freezing point(c):60-64 clarity and color of solution: non-concentraded, not deeper than 2 # standard solution average molecular weight: 18000-21000

Polyethylene Glycol 2000/peg2000   View All Products of this Supplier

We offer polyethylene glycol 2000/peg2000.
Appearance(25c):white waxy solid clarity and color of solution: non-concentraded, not deeper than 2 # standard solution

Polyethylene Glycol6000   View All Products of this Supplier

We offer Polyethylene Glycol6000.
appearance(25℃): white solid powder
freezing point(℃):53-58
average molecular weight: 5500-7500
viscosity:( m㎡/s):11-16
ph  value: 5-7
ignition residue: ≤0.2
storage: stored in dry place.

Polyethylene Glycol10000   View All Products of this Supplier

We offer Polyethylene Glycol10000. appearance white solid powder
freezing point 59-63
average molecular weight 8800-11200
viscosity: 20-26
ph value: 5 7
ignition residue: 0.2

PET Resin (Bottle Grade)   View All Products of this Supplier

We sell PET Resin for making mineral water bottles, carbonated soft drink bottles and plastic bottles.

Hdpe   View All Products of this Supplier

yan de chemical is the national key manufacture of hdpe virgin granules, which is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. hdpe is synthesized under low pressure and is therefore also called low-pressure polyethylene. hdpe is mainly a linear molecular structure and has little branching. it has a high degree of crystallization and high density. it can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion.

Linear Low Density Polyethylene   View All Products of this Supplier

We Offer Linear Low Density Polyethylene (LLDPE) is Polyethylene with a density range of 0.915-0.925g/cm3. It is a linear polymer with extensive short branches

Polyethylene   View All Products of this Supplier

We offer polyethylene:
application:
widely used in petroleum, chemical industry, aquaculture, etc. And it can be used in making of auto back mattress, spring mattress, netting for air conditioner, road base netting, the products can be used to make power cables, control cables, optical cables, telephone cables and signal cables outer sheath.
Specification sadding 20% of it
flexural strength from 20mpa up to 27mpa
tensile-strength from 24.7mpa up to 26.3mpa
heat deformation temperature 6.5% up
density: 1.00-1.05
mi: 1-3
molding temperature: 170-180 centigrade
package: 25kg/pp bag
email:sales001(at)xctchem.

Chlorinated Polyethylene   View All Products of this Supplier

We Offer Chlorinated polyethylene.
1>it is themoplastic elastomer which is an excellent impactmodifier for rigid PVC products, is widely used impact modifier in PVC industry!
2>improve the impact resistance and aging performance

Polyethylene   View All Products of this Supplier

We can provide high density polyethylene.

Polyethylene - (PE)   View All Products of this Supplier

We are offering polyethylene (pe)with high quality and competitive price.

High Density Polyethylene   View All Products of this Supplier

We Offer High Density Polyethylene.
1.high quality
2.reasonable price
3.more used
4.Purity:100%

Low Density Polyethylene   View All Products of this Supplier

We Offer Low Density Polyethylene.
1.high quality
2.reasonable price
3.Purity:100%
4.Grade Standard: industrial grade